Project Details - dremel.com

like (0) I made it (0) Email Print

STEPS

3

SKILL LEVEL beginner

Recycling organic waste is so much easier with this pot -turned-bin that will perfectly fit your worktop. This is a great option for your sustainable lifestyle.

by Dremel ®

228 PROJECTS

Grid View List View

Supplies Needed For This Project

TOOL

4300 High Performance Variable Speed Rotary Tool

Model # 4300

ACCESSORY

561 MultiPurpose Cutting Bit

Model # 561

ACCESSORY

EZ Drum™ Mandrel

Model # EZ407SA

Tools & Accessories

Materials

1
Circle cutter attachment 678-01
1
Pot
1
Safety glasses
1
Face mask
1
Pencil

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Outline the Pot

Choose a pot that is the size you want and place it face down on your countertop in the area you plan to install it and trace the bin. If your bin has handles you can cut them off easily with the Dremel® 4300 and the metal cutting wheel. TIP: Make sure the diameter of the saucepan is no bigger than 12 inches, which is the maximum length of the Dremel circle cutter.

STEP 2

Cut a Perfect Circle

First, put on your face mask and safety glasses because it’s time to cut a perfect circle! (Don’t worry it’s easier than you’d think) For this step, you will want to attach the Dremel circle cutter attachment and cutting but 561 to your Dremel 4300 rotary tool. Set the circle cutter attachment to half diameter of your circled outline, and drill a hole in the middle of the circle to act as your guide. From there trace your outline to fully cut out the circle.