STEPS
SKILL LEVEL
by Dremel ®
226 PROJECTS
Tools & Accessories
Materials
-
1
Dremel 631-01 Brad Point Drill Bit Set -
1
Dremel 220-01 WorkStation™ -
1
30 ft length of 1" PVC -
6
1" T- connectors -
6
1" elbow connectors -
12
Golf balls -
1
12 ft 1/8" nylon cord -
1
Spray Paint
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Step 1
To get started you'll need to cut a total of 15 pieces of PVC. Measure and mark 5 lengths at 32" and 10 lengths at 17". Secure your 1" PVC in a vice or hold it firmly against a lip on your workspace. Using your Dremel Saw-Max, fit with a SM500 wheel, cut along your marked line. The Saw-Max tool has a depth of cut at 3/4" so you may need to rotate the PVC slightly towards you as you complete each cut.
Step 2
With your pipes cut, it is time to drill the holes for your rope to feed through for each bolo. Secure each ball in a Multi-Vice. Mount the NEW 4200 tool equipped with the 1/4" Brad Point bit into the Dremel WorkStation. Using the WorkStation as a drill press will help you achieve a straight hole in each of the 12 golf balls. You can set your 4200 tool to high-speed for this application.
Suggested Videos
Maker Gallery
Be the first to upload a photo of your completed version of this project!
Upload A Photo
Other Projects You Might Like
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
Dremel Experts
From drilling holes to distressing denim, Dremel’s Customer Service has an answer.
Comments(0)
Sign In to post comments on this project.
No comments yet.