Project Details - dremel.com

like (0) I made it (2) Email Print

VIEW ALL Organizational

STEPS

6

SKILL LEVEL intermediate

Maintain an organized workbench by building your own lazy Susan for your power tool accessories.

by Dremel ®

228 PROJECTS

Grid View List View

Supplies Needed For This Project

TOOL

US40 Ultra-Saw™

Model # US40

ACCESSORY

Dremel Ultra-Saw US510 3.5" Metal Cut-Off Wheel

Model # US510-01

ACCESSORY

Dremel MM70P Oscillating Sandpaper

Model # MM70P

Tools & Accessories

Materials

1
Lazy Susan Turn Table
1
Lazy Susan Bearing Plate
1
Pencil
1
Ruler
1
Drill
1
PVC
1
Construction and Adhesive Glue

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

Begin the project by sourcing all parts. For this project, we resourced scrap material we had laying around our workroom, such as extra PVC pipe, plywood and even re-purposed an old end table for the turntable piece. Turntables can also be purchased at most local home centers. Tip: If you purchase a lazy susan turn table with the bearing plate and base included, you do not need to purchase a separate piece, and should skip step 2.

STEP 2

Step 2

Next, set the bearing plate onto the plywood to determine appropriate size of the plywood base. Keep ¼”extra plywood on two sides, while keeping 2” extra plywood on the other 2 sides. Then, cut the scrap plywood with the Dremel Ultra-Saw™.