Cutting a Drain Pipe
- DifficultyEasy
Introduction
Use a two hand grip on the rotary tool when using a cut-off wheel.
You need
Step14
Step 1
You need:
After installing the new sink in your cabinet, you will need to measure the new drainpipe length needed and transfer this dimension to the pipe.
Step24
Step 2
You need:
Clamp drainpipe and cut excess off with the 456 cut-off wheel. Recommended speed: 35,000 rpm.
Step34
Step 3
You need:
Secure pipe to drain basket, slide trap up both pipes and hand tighten.
Step44
Step 4
You need:
Use a smooth-faced wrench to tighten the joints. Test the drain by slowly running cold water (check for any leaks). Tighten any loose fittings. Your sink is now ready to use.
Warning
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.