STEPS
SKILL LEVEL
by Dremel ®
226 PROJECTS
Tools & Accessories
Materials
-
2
48" 1" x 1" x 1/16" aluminum angle -
2
13" 1" x 1" x 1/16" aluminum angle -
5
24" 1" x 1" x 1/16" aluminum angle -
1
24" 1 1/2" x 1 1/2" x 1/16" aluminum angle -
5
Acrylic sheets - 18" x 24" .093" thick -
1
Thin marker -
1
Aluminum rivets- 1/8" x 3/8" -
1
Rivet gun -
1
Vise -
1
Clamps -
1
Silicone Caulk
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Step 1
To begin creating the ends of the terrarium, cut three slots into the 48" aluminum angle with the Dremel Ultra-Saw the following way: (3) 1/4" slots, 15" from the left and the right end, and (1) 1/4" slot at the 24" mark
Step 2
Using a vise for a fulcrum point, secure the aluminum from step 1 at the center slot. Bend the center slot to a 90 degree angle. Then, bend the other two side slots to equal degrees to form a symmetrical shape with a 13" span at the bottom ends.
Suggested Videos
Maker Gallery
Be the first to upload a photo of your completed version of this project!
Upload A Photo
Other Projects You Might Like
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.
Dremel Experts
From drilling holes to distressing denim, Dremel’s Customer Service has an answer.
Comments(0)
Sign In to post comments on this project.
No comments yet.