Project Details - dremel.com

like (0) I made it (0) Email Print

VIEW ALL Home Decor

STEPS

4

SKILL LEVEL

Create this fun and educational Rube Goldberg Wall Mount Marble Track!

by Dremel ®

231 PROJECTS

Grid View List View

Supplies Needed For This Project

TOOL

US40 Ultra-Saw™

Model # US40

ACCESSORY

Dremel MM14U Universal Dual Interface Oscillating Hook and Loop Pad for Sand Paper and Diamond Paper (Single Pack)

Model # MM14U

ACCESSORY

Dremel MM70W Oscillating Sandpaper

Model # MM70W

ACCESSORY

US500-01 4” Carbide Wood Cutting Wheel

Model # US500-01

Tools & Accessories

Materials

1
24" x 24" - 3/4" Luan Plywood
1
10 ft - 1/2" x 1" Poplar Stock
1
12" x 24" - 1/4" Masonite Sheetin
1
Glue
1
Nails/Screws
1
Tape Measure & Pencil

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

To begin your project, cut plywood for the marble track back to 20" x 22" using your Dremel Ultra-Saw and smooth the edges & corners with your Dremel Multi-Max.

STEP 2

Step 2

Next, cut your Poplar for the marble track to the following lengths and quantities: • 1 - 22" inches long • 2 - 18" • 2 - 14" • 1 - 13" (catch basin) • 2 - 9" • 1 - 6" • 3 - 4" Then, rip Masonite in 1" strips & cut to the length of the Poplar strips you just made. Measure & cut Poplar "stops" for the channel & basin ends. Next, assemble the masonite sides to the poplar base and add the poplar stop to one end as shown using wood glue.