How to Trim Your Dog’s Nails At Home



SKILL LEVEL beginner

Beginner Intermediate Advanced
If you want a happy, healthy dog, knowing how to trim your dog’s nails is vital. But giving your pet a pedicure can be intimidating at the best of times. Luckily, help is here. This beginner’s guide to well-trimmed pet’s nails covers all the basics, from how to use Dremel’s new PawControl, to paw handling and what angle to work at. You’ll learn how short you can go without hurting your pup, giving you some much-needed confidence while grinding. Go on, have a go and discover that perfecting your pet’s nails doesn’t have to be stressful.

by Dremel ®


Grid View List View

Supplies Needed For This Project


7300 MiniMite Cordless

Model # 7300

Tools & Accessories


  • 1


Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.


Prepare Your Dremel Nail Grinder

Before you start be sure to clean the tool first or replace the sanding disc if you've used it before. Below we've listed how to prepare the tool before use. First, remove the nail guard. After, pull the mandrel down and remove the old sanding disc. From there, pull the mandrel down again while attaching the new sanding disc. After you've secured the new disc, open the grey section of the nail guard, clasp it shut around the mandrel and screw it into place. Slot the transparent part of the nail guard into place and turn until it clicks.


Find a Comfortable Position to Trim Your Dog’s Nails

Before you start trimming your dogs nails, find a comfy spot for both you and the dog. Position your dog in a way that ensures you can reach all its paws easily, without having to twist its legs. Try the sofa, for instance. Place a towel on your lap and have your dog put its front paws on the towel. This way you can firmly grip the paw and have it in full view as well. Some owners find it easier not to sit opposite their pet, but to face in the same direction instead. By experimenting a little, you’ll discover soon enough which position works best for you and your pooch.


Introduce Your Dog to the PawControl

Before you start your pets pedicure, introduce the dog to the electric pet nail grinder, the Dremel PawControl, and the task at hand. Start by gently touching its paws. If your pet is okay with that, follow it up by giving the paws a little rub. Let the dog sniff and touch the tool for a minute, while you pet it and offer reassurances. Then turn the tool on a few times without trimming any of your dog’s nails yet. This will familiarize him or her with the humming sounds and the vibrations the tool makes. That’s one brave dog, ready to be groomed.


Determine How Short You Want the Nail to Be

Next up, examine your dog’s nails carefully. Locate the pink, live part called the quick, where the nerves and blood vessels run. Cutting into this part causes your dog to yelp in pain and the nail to bleed, so you’d better stay clear. If your dog has black nails, the quick can be hard to see. Instead, find the spot on the underside of the nail where it separates out into a triangular shape with two outer ‘walls’. Cut the nail up to this point and you should be safe. Aim for a fairly straight result, removing the pointed tip so the nails no longer touch the floor when the dog stands.


Turn on the Tool and Start Trimming Your Dog’s Nails

Hold a paw firmly with your non-dominant hand. Press gently on the toe to separate it and make the nail stand out. Switch the tool on; the low setting is best for maintaining short nails, while the high setting (if your dog will allow it) works wonders on long nails. Hold the tool at a 45-degree angle, rest the paw pad on the guard and touch the nail to the sanding disc. The angle means you’ll follow the nail’s natural shape, while the guard keeps your dog’s fur out of the way and protects your pet in case it won’t stay still. Don’t press the nail down too hard; let the tool do the work for you.


Have Little Breaks During Pet Nail Grooming

Want your dog to stay comfortable during the nail grooming session? Have little breaks in between. As grinding creates friction and friction creates heat, a break will prevent the sanding disc from heating up too much and causing a burning sensation in the nail. A break now and then also gives you a moment to reassure and praise your dog. Offer him or her a well-deserved cuddle or a tasty treat. Use the break to study the nail closely. How much more needs grinding away? Are you staying well clear of the pink quick? Once you’ve determined how much more needs trimming, off you go again.


File the Dewclaws’ Nails Too

All dogs have dewclaws, or thumbs, on their front legs. Some dogs have them on their hind legs too; sometimes they even have double dewclaws. These extra toes are found a little higher up on the leg and their nails also need trimming. In fact, the dewclaws’ nails can grow quicker than your pet’s other nails, so keeping a close eye on them from week to week is vital. It’s best to remove the nail guard when trimming dewclaws’ nails, as they can be a little harder to reach. Trimming the nails is straightforward: just file away the pointed tip.


Check the Length of Your Dog’s Nails after Trimming

Once you’ve given all nails on all paws a good filing, it’s time to check your handiwork. Are your dog’s nails still too long, or is it time to bring the nail grooming session to an end? Have your pup stand on all four legs on a flat, hard surface and inspect the individual nails. They have been sufficiently trimmed when they no longer touch the ground.


Praise Your Pet’s Good Behavior

For most dogs, nail trimming is a stressful event, so getting to the end of a successful pet pedicure is a real accomplishment. Well done! Show your dog that you’re proud by offering lots of praise and cuddles. It’s a good time for a dog treat too. By ending the pet nail grooming session on a high note, your dog may even start the next one with a little less trepidation.

Suggested Videos

Rotary Tool - Demo

EZ Twist Demo


Rotary Tool - Demo

EZ-Lock Accessories


Saw - DIY

How To Install a Vent Cover


Other Projects You Might Like


4years ago

Greg's Box Pattern
laser engraving
Greg's Box Pattern

2years ago

Easy DIY Halloween Decor- Foam Tombstones
craft and hobby
Easy DIY Halloween Decor- Foam Tombstones

1year ago

Sicily Tile
laser engraving
Sicily Tile

2years ago

No Promotion available!


Send us a photo of your Dremel creation so we can share it with the world.

No Promotion available!


Explore the creations added to the Maker Gallery by Dremel Makers.


Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.