STEPS
SKILL LEVEL
by Dremel ®
228 PROJECTS
Tools & Accessories
Materials
-
2
8 foot 1x4s -
1
8 foot 1x2 -
1
1" Finishing nails -
10
3/4" Screws -
1
12x12 Sheet metal -
10
Hose Clamps -
3
Mason Jars -
1
Stain of your choice -
1
Foam brush
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Step 1
Measure and mark your cut lines on your 1x4s, making cuts every 27 5/8" with your Dremel Saw-Max equipped with a SM500 wheel. You will need 5 slats, total. You'll also use the same tool to cut 4 1x2s 18 1/2" long.
Step 2
Line up your wood and check to make sure your cuts are correct. For those cuts that might be a little off, you can use the Dremel 3000 sanding attachment to sand them down to the right measurement. It's also perfect for smoothing out the rough edges of your 1x4 slats.
Suggested Videos
Maker Gallery
Be the first to upload a photo of your completed version of this project!
Upload A Photo
Other Projects You Might Like
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.
Dremel Experts
From drilling holes to distressing denim, Dremel’s Customer Service has an answer.
Comments(0)
Sign In to post comments on this project.
No comments yet.