STEPS
SKILL LEVEL
by Dremel ®
228 PROJECTS
Tools & Accessories
Materials
-
1
Luan Plywood- 3/4" thick -
1
Pencil -
1
Ruler -
1
Drill Driver -
1
#10 Countersink drill bit -
1
Baskets for cubbies (optional) -
1
Paint or Stain
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Step 1
First, to create this 6-cubby shelving unit, use the Dremel Ultra-Saw to cut 7 pieces of Luan plywood into the following dimensions and quantities: • 3 pieces of wood at 16" x 44" • 2 pieces of wood at 16" x 30 ½" • 2 pieces of wood at 16" x 29" Tip: Our shelving unit is 45 ½” x 30 ½” but manipulate the measurements to what fits your needs.
Step 2
Next, you are going to create the interior dividers. Start by creating the 3/4" slots. Measure and mark with a pencil at the 3/4" x 8" spot, equally spaced in one of the 16” x 44” pieces and both of the 16” x 29” pieces of wood created in step 1. There will only be 1 cutout in the smaller pieces of wood, and 2 total cutouts in the larger piece of wood. Refer to image 3.a. Then, use the Ultra-Saw to cut the long cuts, and finish the slot by crosscutting with the Multi-Max and 3/4" wood blade.
Suggested Videos
Maker Gallery
Be the first to upload a photo of your completed version of this project!
Upload A Photo
Other Projects You Might Like
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.
Dremel Experts
From drilling holes to distressing denim, Dremel’s Customer Service has an answer.
Comments(0)
Sign In to post comments on this project.
No comments yet.