SKILL LEVEL beginner
by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Download Cut and Engrave Files
Download the laser cut file from this page by using the download button above
Unzip and Import
Unzip the contents of the .zip folder containing all of the cut and engrave files. Start by placing the engrave file and then placing the cut file on the work piece. Orient the engrave file so that it is directly on top of the cut file. Another fun option with this project is to import a different engrave file and customize your phone stand!
Run Cut and Engrave Files
After placing the cut and engrave files on your work piece, your laser is ready to be run. Select 1/8th inch thickness and the material that you chose and begin. File names to cut and number of pieces needed: “Cell_Phone_Stand.PDF” “Cell_Phone_Engrave.PDF”
Assemble Phone Stand
Assembly is simple and easy and the picture for this step should make it clear how the stand can be assembled. Simple insert the smaller piece through the larger so that the 2 prongs of the smaller piece are coming through the slits on the larger piece.